Basic Info.
Product Description
Electrostatic powder painting booth
Operator Safety
Environmental compliance
Production capacity and operational efficiency
Spray booth specification :
The powder booth fans draw air through filters and releases it through the top of the booth. It keeps your shop nice and clean,minimizing powder dust.
include fans, motors, nut and bolt fasteners, filters, detailed drawings and instructions, all included in one single shipment.
| Model | COLO-S-1115 |
| Booth Type | Closed |
| Operator dimensions | 1000width x 1500 height x 1000 depth |
| Overall dimensions | 1200width x 2000 height x 1500 depth |
| Weight | 200kg |
| Power supply | Electric |
| Nominal power | 1.5kW |
| Voltage | 380V |
| Frequency | 50-60Hz |
| Filters | Polyester |
| Filters count | 2 |
| Filters hang type | easy for change |
| Filter cleaning system | Pneumatic |
| Warranty | 12 months |
Body material: δ=1.5mm galvanized plat . pulse valves and solenoids
recycling fan : 1/set, 2.2KW
Filter size :φ325×600 fast-loading, 2 pcs
light: 220v 18w 1 pcs
Voltage is 380V /50HZ (could make as you want)
Details
with quick release filters ,make powder can be collected
simple control panel,easy using . fan on /off/light swith /stop .
with fan motor ,make powder can be absorb by the filter ,wo not spread out
Powder coating booth With Recovery System:
Automatic powder collecton Bin. It's work with Air pump,can be controlled by PLC control system .when press down ,can get the recovery powder .After seiving ,can reuse the powder .economic
Powder coating Oven specification :
This Powder coating oven used for curing the workpiece which has been spraying during the powder coating. When a thermoset powder is exposed to elevated temperature, it begins to melt, flows out, and then chemically reacts to form a higher molecular weight polymer in a network-like structure.
Structure:consist of Body,insulation, cover, heater. use gas to create the energy ,through the circulating fan ,make the temperature in the oven to rise uniformly. Then make the temperature of workpiece to rise.
built-in track to roll your powder coating racks into the ovens could be ordered together as you required.
Specification of the powder coating oven:
| Worksize dimensions | 1000width x 1600 height x 845 depth |
| Overall dimensions | 1160 width x 2200 height x 1100 depth |
| Power supply | Electric/ 6.55kw |
| Voltage/Frequency | 110V/220v(50-60hz) |
| Warm-up time | 15-30 min. (180° C) |
| Temperature stability | < ± 3-5°C |
| Temperature max. | 250° C |
| Motor power | 0.55kw |
| Circulation/ Air flow | Vertical ,Variable through holes on the walls |
| Ventilation performance | 805-1677m3/h |
Products Details
1.Great fan motor One set of heat resistant fan for circulating the hot air,maintains a uniform temperature in oven
2.use great electricity tube ,take short time to heat.
3. control, accurate cure timing and helps improve fuel efficiency.
4.Optional insulated floor is comprised of 100 mm thick layer of insulated fibres and a steel plate cover, which allows trolleys to be used to carry products in and out of the oven.
5.with one set trolley ,can be customized made
There are also many sizes oven can be chosen ,accept customized size oven.
Powder coating spray gun
Technical Data
| Electrical Data | |
| Power Range | 220V/110V |
| Frequency | 50HZ/60HZ |
| Temperature range in use | -10 ºC+50 ºC |
| Powder Gun | |
| Gun weight | 500G |
| Rated output voltage | 24VDC |
| Input voltage | - 200kv |
| Maximum output current | 180Ua(max |
| Maximum output voltage | 0-100KV (adjustable) |
| Maximum powder injection | 600g/min |
| Polarity | negative (-) |
| Pneumatic Data | |
| Maximum input-air pressure | 10kg/cm |
| Optimum input-air pressure | 6kg/cm |
| Minimum input-air pressure | 4kg/cm |
| Maximum oil vapor content of compressed air | 1.4g/N m3 |
| Maximum compressed-air consumption | 13.2 m3/h |
Specification &Advantage
1.0-100 Digital Adjustable KV ,Fully Adjustable Amperage
2.With three setting program,flat mode for flat shape workpiece, corner mode for complicated shape workpiece, recoating mode for respraying , easy for operation and suit for both beginners and specialist.
.
3. Portable ,suitable for medium and small production capacity.If you need change colours very offenly it is economic to buy more small cups for different powders .Saves a lot of time.
4.LatestDigital Valve Control (DVC) technology ensures precise and reproducible powder output regulations and improves the film thickness consistency.
Application
Now ,powder coating is a new hottest trend in the industry .many factory choose powder coating ,replacing the liquid paiting because of the economic ,safety ,no pollution and goods effect. It can apply in LPG cylinder/fan /refrigerator/Shelf/door/electric cabinet/aluminum profiles/auto wheels/Fire extinguisher industry.
Customer Visiting&Exhibition
We have went to many exhibitions durning our 11 years running .Also many customers visit our company ,check the goods and discuss to expand our business .
Buying Guide
We can ship this products in 20-30working days after payment .sea shipping to your country
If you are interested in this product ,pls feel free to contact us
Address : No.57 Xiangcang RD,Xihu District,HangZhou city, China